ASD-STAN prEN 3818 P2

Aerospace series — Bolts, MJ threads, in titanium alloy TI-P64001 — Strength class: 1 100 MPa (at ambient temperature) — Technical specification

Aerospace series — Bolts, MJ threads, in titanium alloy TI-P64001 — Strength class: 1 100 MPa (at ambient temperature) — Technical specification

ASD-STAN prEN 2583 P2

Aerospace series — Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), Classification: 1 275 MPa (at ambient temperature)/650 °C — Technical specification

Aerospace series — Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), Classification: 1 275 MPa (at ambient temperature)/650 °C — Technical specification

ASD-STAN prEN 2670 P2

Heat resisting nickel base alloy Ni-P96 – Melted under vacuum – Solution treated and precipitation treated – Forgings

Heat resisting nickel base alloy Ni-P96 – Melted under vacuum – Solution treated and precipitation treated – Forgings

ASD-STAN prEN 2089 P1

Aerospace series – Aluminium alloy AL-P2014A-T6 or T62 – Sheet and strip – 0,4 mm ≤ a ≤ 6 mm

Aerospace series – Aluminium alloy AL-P2014A-T6 or T62 – Sheet and strip – 0,4 mm ≤ a ≤ 6 mm

ASD-STAN prEN 3545-004 P2

Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperature – 55 ° C to 175 ° C – Part 004 : Connectors with male contacts – Product standard

Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperature – 55 ° C to 175 ° C – Part 004 : Connectors with male contacts – Product standard

ASD-STAN prEN 4085 P2

Nickel base alloy NI-B40002 – Filler metal for brazing – Amorphous foil

Nickel base alloy NI-B40002 – Filler metal for brazing – Amorphous foil

ASD-STAN prEN 2349-316 P1

Requirements and test procedures for relays and contactors – Part 316: Mechanical life ( endurance at reduced load )

Requirements and test procedures for relays and contactors – Part 316: Mechanical life ( endurance at reduced load )

ASD-STAN prEN 2349-307 P1

Requirements and test procedures for relays and contactors – Part 307: Contact voltage drop

Requirements and test procedures for relays and contactors – Part 307: Contact voltage drop

ASD-STAN prEN 2349-318 P1

Requirements and test procedures for relays and contactors – Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature

Requirements and test procedures for relays and contactors – Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature

ASD-STAN prEN 4176 P1

Lockbolts, 100° countersunk normal head or protruding head, tension- /sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating – Collars in titanium TI-P99002 or aluminium alloy 2024 – Metric series – Technical

Lockbolts, 100° countersunk normal head or protruding head, tension- /sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating – Collars in titanium TI-P99002 or aluminium alloy 2024 – Metric series – Technical