ASD-STAN prEN 2465 P1

Aerospace series – Steel FE-PA3901 (X2CrNi18-9) – Softened – 450 MPa < = Rm < = 680 MPa – Bar for machining – 4 mm < = De < = 100 mm

Aerospace series – Steel FE-PA3901 (X2CrNi18-9) – Softened – 450 MPa < = Rm < = 680 MPa – Bar for machining – 4 mm < = De < = 100 mm

ASD-STAN prEN 2798 P1

Fluorocarbon rubber (FPM) – Low compression set – Hardness 80 IRHD

Fluorocarbon rubber (FPM) – Low compression set – Hardness 80 IRHD

 

ASD-STAN prEN 2797 P1

Fluorocarbon rubber (FPM) – Low compression set – Hardness 70 IRHD

Fluorocarbon rubber (FPM) – Low compression set – Hardness 70 IRHD

 

ASD-STAN prEN 2799 P1

Fluorocarbon rubber (FPM) – Low compression set – Hardness 90 IRHD

Fluorocarbon rubber (FPM) – Low compression set – Hardness 90 IRHD

 

ASD-STAN prEN 3539 P1

Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS2 lubricated – Classification : 1 100 MPa (at ambient temperature) / 315 °C

Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS2 lubricated – Classification : 1 100 MPa (at ambient temperature) / 315 °C

ASD-STAN prEN 3538 P1

Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated – Classification : 1 100 MPa (at ambient temperature) / 315 °C

Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated – Classification : 1 100 MPa (at ambient temperature) / 315 °C

TR 3540-001

Use and selection of self-locking wire thread inserts

Use and selection of self-locking wire thread inserts

ASD-STAN prEN 3542 P1

Insert, screw thread, helical coil, self-locking, in heat resisting alloy, nickel base alloy (INCO X750 – EN 3018), unplated

Insert, screw thread, helical coil, self-locking, in heat resisting alloy, nickel base alloy (INCO X750 – EN 3018), unplated

ASD-STAN prEN 3541-001

Rod ends, adjustable, self-aligning ball bearing with threaded shank – Dimensions, torques, clearances and loads

Rod ends, adjustable, self-aligning ball bearing with threaded shank – Dimensions, torques, clearances and loads

ASD-STAN prEN 3543 P1

Bolts, 100° countersunk normal head, offset cruciform-ribbed recess, close tolerance shank, short thread, in corrosion resisting steel, passivated – Classification : 1100 MPa/ 425 °C

Bolts, 100° countersunk normal head, offset cruciform-ribbed recess, close tolerance shank, short thread, in corrosion resisting steel, passivated – Classification : 1100 MPa/ 425 °C