ASD-STAN prEN 4540 P2

Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Technical specification

Form: prEN Registration Number: 4540 Edition: P2
Date of Publication: 30-May-2010 Number of pages: 37
Document Type: Technical Specification Domain: Mechanical
Scope: This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for spherical plain bearings in corrosion resisting steel, self aligning with self-lubricating liner designed to withstand (under load) slight swivelling and slow rotations only. This standard applies whenever referenced. These bearings EN 4538-1, EN 4538-2, EN 4539-1 and EN 4539-2 are for actuator applications and for use in the temperature range – 54 °C to 163 °C and for EN 4538-003 and EN 4539-003 for use in the temperature range – 54 °C to 120 °C. The liner may be of a fabric or composite material bonded to the inside diameter of the outer ring or in a composite material moulded into a pre-formed cavity between the inner and outer rings. The duty cycle (Annex E, normative) has been established on the basis of a civil aircraft aileron surface application.
Status: Superseded Replaced by: EN 4540:2011
Price (excl. VAT): €166.49
Normative References: EN 10045-1 EN-2002-01 EN-2002-02 EN-2002-05 EN-2002-06 EN-2002-07 EN-2002-08 EN-2002-22 EN-2003-02 EN-2003-07 EN-2003-08 EN-2003-12 EN-4235-01 ISO 3887